Answer: Never Explanation: The pressure washer will take the oil out of the asphalt and make it crumble. Never wash asphalt. |
Texas Bin Solutions |
Answer: Always Explanation: Pressure washing an asphalt driveway can be done safely if proper precautions are taken. Here are some guidelines to ensure safety:
Low Pressure: Use a pressure washer with adjustable pressure settings. For asphalt surfaces, a lower pressure setting is generally sufficient to clean without causing damage. Start with the lowest pressure and gradually increase as needed.
Wide Nozzle: Use a wide-angle nozzle tip to disperse the water over a larger area. A 25-40-degree nozzle is suitable for asphalt surfaces. This helps reduce the intensity of the water stream.
Proper Distance: Maintain a safe distance from the surface. Keep the nozzle at least 6-12 inches away from the asphalt. Holding it too close can damage the surface.
Even Pressure: Maintain consistent and even pressure across the entire surface. Avoid concentrating pressure on one spot for too long, as this can cause damage.
Cleaning Solutions: Consider using a mild detergent or asphalt cleaner to help remove stains and dirt. Follow the manufacturer's instructions for dilution and application.
Rinse Thoroughly: After applying any cleaning solution, rinse the asphalt surface thoroughly with clean water to remove any residue.
Avoid High PSI: Avoid using a pressure washer with an excessively high PSI (pounds per square inch) setting, as this can damage the asphalt.
Inspect the Surface: Before pressure washing, inspect the asphalt for cracks, holes, or loose areas. Avoid pressure washing these areas, as it can worsen the damage. Instead, consider patching or repairing them separately.
Protect Nearby Surfaces: Cover nearby plants, vehicles, and sensitive surfaces to prevent damage from overspray or cleaning solutions.
Safety Gear: Wear appropriate safety gear, including safety goggles, closed-toe shoes, and hearing protection. Gloves and waterproof clothing are also recommended.
Proper Technique: Use a consistent back-and-forth or sweeping motion when pressure washing. Avoid directing the spray in one direction for to |
Put Pressure On Em |
Answer: In some cases Explanation: Depends on condition of driveway |
SOUTHERN EXTERIORS |
|
ProMatcher |
Answer: Never Explanation: Asphalt driveways are to soft for pressurecleaning. The proper way to clean an asphalt driveway is to chemically treat it and wash it down. |
Ultimate power washing systems |
Answer: Always Explanation: There are very few things that can bring an issue to pressure washing an asphalt driveway. |
Wildcat Pressure Washing |
Answer: Never Explanation: It will eat up the asphalt. |
Seymour Clearly |
|
ProMatcher |
Answer: In some cases Explanation: N/a |
Hallelujah mobile detail & pressure washing |
Answer: Always Explanation: Low pressure |
Garys deck |
Answer: In most cases Explanation: wear gogles |
Artios Painting 309 788 9432 |
|
ProMatcher |
Answer: In most cases Explanation: As long as the asphalt does not have multiple cracks and a lot of loose particles and must use extreme caution when power washing. |
Dan's Pressure Washing and Sealing |
Answer: In most cases Explanation: Yes |
Temple Painting |
Answer: In some cases Explanation: A soft was using hot water and chemical, it would need resealing afterwards |
H2O Environmental Alabama LLC |
|
ProMatcher |
Answer: In most cases Explanation: As long as you wear glasses and remove loose debris you should be fine. |
Xstream detailing |