Answer: In some cases
Explanation: Depending on what kind of graffiti it is and how long it’s been there most of the time you’ll need to use chemicals and then power wash it |
| Texas Bin Solutions |
Answer: Yes, always
Explanation: Yes, it is possible to remove graffiti using pressure washing equipment. Pressure washing is an effective method for graffiti removal, especially on a variety of surfaces such as brick walls, concrete, metal, and some types of wood. Here are the steps to remove graffiti with pressure washing:
Safety Precautions:
Safety Gear: Always wear safety goggles, gloves, and appropriate protective clothing when operating a pressure washer.
Steps for Graffiti Removal:
Assess the Surface: Examine the graffiti to determine the type of surface it's on and the type of paint or marker used. This information will help you choose the right cleaning method and equipment.
Select the Right Pressure Washer:
Choose a pressure washer with an appropriate PSI (pounds per square inch) rating for the task. Graffiti removal typically requires medium to high pressure, ranging from 2,000 to 4,000 PSI, depending on the surface and paint type.
Ensure that your pressure washer has a variable spray nozzle or a turbo nozzle, which can provide a narrow, concentrated stream of water for precision cleaning.
Pre-Treat the Graffiti:
Apply a graffiti remover or a cleaning solution specifically designed for graffiti removal to the affected area.
Allow the solution to sit for the recommended dwell time as per the product instructions. This will help loosen the paint or marker.
Pressure Washing:
Start pressure washing with the nozzle at a safe distance (typically 6-12 inches) from the graffiti-affected surface.
Use a side-to-side sweeping motion to clean the graffiti. Avoid holding the nozzle in one spot for too long to prevent damage.
Adjust the pressure and nozzle distance as needed to achieve the desired cleaning effect.
Rinse and Inspect:
After pressure washing, thoroughly rinse the cleaned area with clean water to remove any remaining graffiti remover or paint residue.
Inspect the surface to ensure that all graffiti has been removed. Stubborn or layered graffiti may require additional passes.
Repeat if |
| Put Pressure On Em |
Answer: In most cases
Explanation: It all really depends on the substrate being cleaned. Whether its on brick, concrete, vinyl, glass, etc. A pressure washer in combination with a chemical solution will be required to remove most graffiti. |
| All American Pressure Cleaning |
|
| ProMatcher |
Answer: In some cases
Explanation: In some cases graffiti can be removed with high pressure spray alone, which is better as chemicals can be too harsh for some surfaces. If the graffiti has settled into the surface for more than a few days, it'll be much harder to remove with water pressure alone. |
| Inviso Services |
Answer: Yes, always
Explanation: Yes, when the proper chemical is applied. |
| Prestige Power Washing, LLC |
Answer: In most cases
Explanation: Have to have the right chemicals and knowledge |
| Professional Pressure Washing |
|
| ProMatcher |
Answer: In most cases
Explanation: Yes, however, you may need to use chemicals. |
| Wildcat Pressure Washing |
Answer: In most cases
Explanation: A strong chemical called taganator is used to totally remove graffiti from concrete, and tagaway to remove graffiti from vinyl. The pressure washer is used in this process. |
| Brightway Window Cleaning & Powerwashing |
Answer: In some cases
Explanation: It could just depends on what type of paint was used to graffiti . |
| Seymour Clearly |
|
| ProMatcher |
Answer: Yes, always
Explanation: With added heat and proper wet sanding systems |
| Hallelujah mobile detail & pressure washing |
Answer: Yes, always
Explanation: Use Graffiti Removel Wait 15-20 Mins And Power wash |
| DDJ Mobile Pressure Washing and Car Washing, Detailing inc. |
Answer: Not sure
Explanation: Wow, that's one to try myself. When I do, I'll be sure to let you know. |
| A. ESCALANTE'S PRESSURE WASHIN |
|
| ProMatcher |
Answer: In most cases
Explanation: Yes, after you apply graffiti removal product, you can use a pressure washer to remove the Graffiti. |
| Lanaville Contracting |
Answer: Yes, always
Explanation: With the rite tip and cleaner |
| Garys deck |
Answer: In most cases
Explanation: with a stripper |
| Artios Painting 309 788 9432 |
|
| ProMatcher |
Answer: No, never
Explanation: Most of the time the surface has to be painted over after power washing. |
| Dan's Pressure Washing and Sealing |
Answer: In most cases
Explanation: Some may require more of a sand blast or steam |
| Mallett Pro Wash |
Answer: Yes, always
Explanation: We use a specialized chemical made for graffiti to dissolve the spray paint and then use w=hot water and pressure to remove the tagging. |
| Quality Pressure Washing of Houston |
|
| ProMatcher |
Answer: In most cases
Explanation: The cleaning solution will play a large part in graffiti removal. |
| 5 Star Property Maintenance & Pressure Washing, LLC |
Answer: In most cases
Explanation: Yes combined with chemical it can be removed |
| H2O Environmental Alabama LLC |
Answer: In most cases
Explanation: I've done it many times before |
| Sunshine Business Group LLC |